Assembly - High/Low Gear

LT230 low range gear, to suit all LT230s from XXD226368E (with the thin engagement teeth).

Part no. FTC1084

Hi/Lo selector hub to fit the TD5 Defender TD5 Discovery and TDCi Defender, note this fits the centre diff with the larger 58mm spline.

Hi/Lo selector hub to fit the LT230 from serial number XXD226636E, excluding TD5 Defender, TD5 Discovery and TDCi Defender (for these vehicles you will need FTC5099)

Note this fits the centre diff with the smaller 54mm spline

LT230 1.003 High Gear

Fits all LT230’s type 26D from 26D226368E onwards.

High range output gear for the 1.211 ratio, as used in all TDCi Defenders and all Discovery II and the later suffix G Discovery I boxes.

These part numbers all refer to the same product. The numbers have been superceeded over time but the part number is interchangeable.

LT230 1.222 High Gear

Fits all LT230’s type 28D from 28D226368E to 28D309143E.

LT230 1.410 high range gear.

To suit all LT230s with suffix C & D

LT230 1.410 high range gear.

Fits all LT230's type 22D from 22D226368E, type 43D and type 57D.

LT230 1.667 High Gear

Fits all LT230’s type 20D from 20D226368E onwards.

LT230 High Range Gear Bush

Suits all LT230T Suffix B onwards

Part No. IEE100050 and FRC7441

This taper roller bearing fits the centre diff on all LT230s.

These are genuine Timken brand bearings.

Cup number: JLM104910

Cone number: JLM104948

Nut, Part no. IYH000030

Selector Lever, Part no. FTC3627

Part No. FTC2827

Grub Screw, Part no. UYP500110

Part no. FRC7929

Selector Shaft, Part no. IJL500030

This is to fit all TDCi LT230s type 80D and 81D

Selector Shaft, Part no. FRC8900

Use this type when the detent is next to the diff lock switch, early type

Use this type when the detent is at the front of the front housing by the drive flange, late type

Spring, Part no. FRC5562

Detent Ball, Part no. 571146

O-Ring, part no. FRC5575